home
about
news
product
case
contact
message
When decorating, there are always some areas that we overlook, such as bathroom decoration. We all know that the bathroom is a place that is humid all year round, so when choosing ceramic tiles to decorate the bathroom, we must consider the factors of non-slip and stain resistance. Then let’s take a look at today’s topicBathroom Tile Decoration How about the renderings!
Let’s take a look at what factors should be considered when choosing bathroom tiles!
1. Factors to consider when choosing bathroom tiles
1. Color selection
The color of bathroom tiles should be selected to match the overall style of the bathroom. For a small bathroom, it is suitable to choose some light-colored tiles, which can make the space have a bright and spacious visual effect, or choose vitrified tiles to expand the visual effect of the space. Effect.
If it is a medium-sized bathroom, you can choose warm-toned tiles. Of course, if you like to personalize it, you can also choose cold-toned tiles. If it is a large bathroom, you can choose dark-colored ceramic tiles with some light-colored waistlines to make it more noble.
2. Specification selection
The bathroom area is limited, so there are certain requirements for the size of the tiles. Not only is the space small, but there are many corners, so it is best to choose smaller tiles. Even for larger bathrooms, large-sized floor tiles cannot be used. Cutting them will cause waste and make it inconvenient to level the floor and install floor drains. Common bathroom floor tile specifications are 300mm*300mm and 330*330mm.
3. Water absorption rate selection
The moisture in the bathroom is very high, which is very important for the water absorption rate of ceramic tiles. It is better to choose ceramic tiles with low water absorption rate, which are easy to dry and not affected by moisture.
4. Wear-resistant and stain-resistant options
The bathroom is a place that is frequently used and easily dirty, so it is necessary to choose some ceramic tiles with good wear resistance and stain resistance. This can be judged by the thickness of the glaze layer of the ceramic tiles. If the ceramic tiles are not glazed enough, the bricks will be damaged. The brick surface easily traps dirt and is difficult to clean, and the pores on the brick surface absorb water vapor and cannot escape, causing mold to appear. You can also use a hard object to scratch the surface of the brick to see if there is anyLook for scratches to judge wear resistance.
5. Anti-skid selection
A wet bathroom is very slippery and easy to fall over. The anti-slip effect of floor tiles is very important. You can choose full-body tiles, glazed tiles, etc., or floor tiles with matte surfaces and shallow convex and concave shapes, which are more anti-slip.
6. Texture density selection
The ceramic tile surface is uneven and has pinholes with uneven thickness. These are textures with low texture density and poor hardness, and are not suitable for selection.
7. Wall tile selection
The bathroom is in a humid state for a long time, so the wall tiles should be selected with strong anti-fouling ability, rich color patterns, strong waterproofness, corrosion resistance, and mildew resistance, such as glazed tiles and glass tiles.
8. Floor tile selection
It is best to choose tiles with raised patterns for the floor, which have good anti-slip effect. Of course, they should also be waterproof, wear-resistant, and stain-resistant. You can choose full-body tiles, vitrified tiles, mosaics, etc.
2. Bathroom tile decoration renderings
Just look at the decoration renderings and you will know.
In fact, from the picture above, you can see what the bathroom tile decoration renderings look like. So that’s what I’ll share today. I hope it can be helpful to you! Slip, slip, slip!
Copyright © 2011 ceramic board factory,ceramic board manufacturer,ceramic board company,ceramic board price,ceramic board oem middia All Rights Reserved.XML map